Aluminium Corner Spacer designed to add strength to >90 degree corners. Corners can be vulnerable points in a security barrier. This accessory fits over Vandgard’s spindle to accurately hold corners together and maintain enough clearance to rotate freely. Used in conjunction with a Support Bracket ( Part No Supp01 )
Simple to fix
Corrosion free aluminium
Next Day Delivery!
Corner Spacer ex BS6082 Aluminium Tube 275mm long x 27mm internal diameter closed and flattened one end and drilled with 27mm hole
Corners are securely locked together with Corner spacers positioned 150-300mm back from the end of a run of Vandgard Anti Climb Guard together with an extra support bracket. Supports should be adjusted to support Vandgard centrally over walls and fences with a clearance not exceeding 50mm. Bolted, clamped or welded to fences gates walls and soffits. Vandgard must be supported at 2 metre intervals and at corners.
NOTE: Corners less than 60degrees may be easily formed using a 25mm plumber’s pipe bending machine on the spindle.…