Laser cut galvanised steel supports
Galvanised steel support bracket designed to fit most double row applications including Walls Fences Gates & Steel palisade fencing. A vertical support bracket . Fixed vertically on walls etc. or horizontally under a soffit or on a flat ledge.
Galvanised steel support bracket
Ex 40 x 6 Mild steel bar slotted twice to receive 8mm fixing bolts ( bolts not supplied) and drilled with 29mm diameter hole to support Vandgard Anti-Climb axle. Galvanised after manufacture to (BS EN ISO 1461) Laser cut and folded.
Supports should be adjusted to support Vandgard centrally over walls or to the back of fences with a clearance not exceeding 50mm. Bolted, clamped or welded to fences gates walls and soffits. Vandgard must be supported at 2 metre intervals.
(Designed to support Vandgard part nos VS05 and VSC05)
For steel palisade fencing, supports must be fixed to the pales at 2metre intervals. Usually cranked to the rear and fixed between the horizontal rail and vertical pale with one extra long 8mm fixing rivet .Use the existing fixing holes .
Standard finish means natural, self-colour galvanised metal finish (i.e. not coated or painted)