JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Rota-Spike (70 spikes)

Rota-Spike (70 spikes)

Rota-Spike (70 spikes) 119.90 2,038.30 Galvanized for 6m length tube…

Model
Rota-Spike
M8 X 75 Masonry Bolts

M8 X 75 Masonry Bolts

Simple and fast to use. Simply drill and tighten. This fixing is for Vandgard support brackets fixed to Brickwork and Concrete…

Model
FIX22
Galvanising

Galvanising

Galvanising per kilo…

Model
gavl01
Extra Joining Spigot

Extra Joining Spigot

Aluminium joining spigot. This accessory is designed to easily join together two lengths of Vandgard shaft in one continuous run. The spigot is made slightly larger than the internal diameter of the shaft. Using a pair of ‘Mole’ or ‘Vice’ grips the spigot is squeezed and inserted halfway into the shaft so that it springs open tightly in place inside the shaft.   Simple to fix   Corrosion free aluminium   In Stock!   Next Day Delivery!         Specification:   Aluminium spigot extruded section to patented design 150mm long. Ex BS 6082 aluminium. Designed for use with Vandgard anti-climb system and shaft (product code vs05 contains one spigot per 2metres))   Fixing:
Using grips the sprung spigot is compressed sufficiently to fit inside the tubular aluminium shaft and then hammered in for approximately 75mm ensuring a tight fit. The process is repeated with further sections of shaft at maximum 2 metre intervals to provide a smooth and continuous spindle.   Note: When fixing a ‘Rotaguard’ acoustic alarm system, the sensor should be fed through the spindle during the fixing process.…

Model
SPIGBAC01
Stop End

Stop End

Stop Washer and Shear Nut large 25dia washer and M6 bolt with anti vandal shear nut. This assembly is to securely end a run of Roller Barrier. Required at open ends to allow free rotation of the tumblers.…

Model
STOP WASHER
Single Pair Feeder Cable GQFC-9

Single Pair Feeder Cable GQFC-9

Single Pair Feeder Cable GQFC-9…

Model
ACOU05
Ten Pair Feeder Cable GQFC12

Ten Pair Feeder Cable GQFC12

Ten Pair Feeder Cable GQFC12…

Model
ACOU07
Raptor Aluminium Joining spigot

Raptor Aluminium Joining spigot

300mm Aluminium tube Joining spigot 12.5mm x 18g …

Model
spigbac02
Five Pair Feeder Cable

Five Pair Feeder Cable

For further infrmation, please download the Technical Information PDFs Five Pair Feeder Cable…

Model
ACOU08
Single Rota-Spike

Single Rota-Spike
Rota-Spike...see more

Single Rota-Spike Galvanized Single galvanised Rota-Spike for use with tube and other Rota-spike accessories. 85mm long  x 70 per 6m top rail…

Individual standard vanes

Individual standard vanes

Individual vanes are the building components for Vandgard Rotating Anti Climb Guard. 2 of these individual vanes interlock to form a rotating pair.  This product is usually supplied to make up or infill small sections of Barrier.

Colour coated Vandgard is visually softer than the standard version but no less effective. It is ideal for protecting walls, gates, and all types of fence, rooftops, windows and alleyways. In fact all situations where serious vandalism or theft is likely and particularly where Public Liability legislation applies. Examples include commercial and industrial sites, schools, vehicle parking areas, domestic, sports and leisure areas. This Anti-climb guard will eliminate any stable platform or foothold that an opportunist might otherwise use to scale a wall.   Popular in schools and conservation areas   Simple to assemble   Corrosion free   Approved by planners   Strong and effective without intent to harm   Complies with Health and Safety and Legal Liability   Green and Black in Stock! Any other colour possible: POA   Next Day Delivery       Description:
A freely rotating anti-scaling security obstacle designed to effectively roll away aggression and crime without intent to harm.   Includes:

1 individual vane ( Forms half of an interlocking pair in the illustration )
    Fixing:
Vanes are threaded alternately onto a 26mm spindle which is crimped at the end with a hammer to secure the vanes. Vandgard must be supported at 2 metre intervals.

    Finish:
Standard aluminium bare metal finish.   Note: Vanes are also available Polyester Powder Coated with a decorative finish.
Polyester powder coating is in accordance with BS 6496:1984 for application to aluminium alloy extrusion.    …

Model
V650
Bespoke Colour Moulding (1000 MoQ)

Bespoke Colour Moulding (1000 MoQ)

Colour moulding
Roller Barrier may be in any colour, thickness and texture to customer specification.             Fast turnaround!   Description:
A surcharge for special colours per order.
Extra over our prices for stock Green White or Black.
  Finish:
A variety of finishes to customer specification including trademarked colours.…

Model
PLAS06
Tumblers

Tumblers

Individual Tumblers are the building blocks of Roller Barrier.…

Model
ROLLER TUMBL
Single Raptor Spike

Single Raptor Spike
Single Raptor Plastic Spike Single Raptor Plastic Spike for use with tube and other Raptor accessories....see more

Single Raptor Plastic Spike Single Raptor Plastic Spike for use with tube and other Raptor accessories. 7 x per metre…

Stop End Bolt (pair)

Stop End Bolt (pair)

Stop End - M6 bolt with  nut. This assembly is to securely end a run of Rota Spike. Required at open ends to allow free rotation of the Spikes.…

Model
end42mm
Rotaguard Acoustic Sensor

Rotaguard Acoustic Sensor

Rotaguard incorporates Geoquip's renowned Alpha Sensor GDALPHA  detection system which alerts security personnel to any attempted intrusion and allows alarms to be verified by the unique 'listen-in' audio verification. Latest generation precision sensor technology Uses spirawire manufacturing techniques for EMI and RFI immunity  Incorporates lubritube technology for ultra sensitive detection  Suitable for external and internal applications  Superior audio clarity that cannot be matched  Weather resistant and robust construction The Alpha Sensor is the next generation sensor designed solely for perimeter security. Its patented magnetic construction combined with the very latest techniques in sensor design have resulted in it being the benchmark for the industry. Resulting from many years of experience of sensor design, the Alpha Sensor exploits new manufacturing technology that enhances its performance. Spirawire is a process where the cable is twisted at exact intervals to provide a natural rejection capability against radio frequency and electromagnetic interference. Lubritube is a technique where specially lubricated tubes enable the precision sensor wires to move freely during an attack. High levels of detection are achieved from the improved frequency response that the sensor produces without the need to introduce complex electronic processing or increase the amplitude of the signal which is the main causes of false alarms with old generation sensors. Detection is linear along the entire length resulting in no blind spots, providing a detection range of approximately 1.5m either side of the sensor.     …

Model
ACOU01
Individual shaft/spindle x 1metres

Individual shaft/spindle x 1metres

Stocked in Standard finish aluminium. Individual shaft/spindle lengths are one of the building components for Vandgard Rotating Anti Climb Guard. These Shafts are 1metre long. This product is usually supplied as a replacement or to make up or infill small sections of Barrier.  
Vandgard is ideal for protecting walls, gates, and all types of fence, rooftops, windows and alleyways. In fact all situations where serious vandalism or theft is likely and particularly where Public Liability legislation applies. Examples include commercial and industrial sites, schools, vehicle parking areas, domestic, sports and leisure areas. This Anti-climb guard will eliminate any stable platform or foothold that an opportunist might otherwise use to scale a wall.   Corrosion free   In Stock   Next Day Delivery         Description:
Individual shaft length 26dia x1000 usually used with a joining spigot (Part number SPIGBAC01)   Pack Includes:
Spindle:
Extruded round tube BS6082   Fixing:
Vanes are threaded alternately onto the spindle which is crimped at the end with a hammer to secure the vanes. Vandgard must be supported at 2 metre intervals.

  Finish:
Standard aluminium natural self colour…

Model
TUO25-10/SAS
Vertical support bracket

Vertical support bracket

Galvanised steel support bracket designed to fit most double row applications including Walls Fences Gates & Steel palisade fencing. A vertical support bracket . Fixed vertically on walls etc. or horizontally under a soffit or on a flat ledge.   Simple to fix with 8mm fixings Spin Galvanised against corrosion Strong 6mm steel. 
  Laser cut and Folded for strength   Description:
Galvanised steel support bracket   Specification:   Ex 40 x 6 Mild steel bar slotted twice to receive 8mm fixing bolts ( bolts not supplied) and drilled with 29mm diameter hole to support Vandgard Anti-Climb axle. Galvanised after manufacture to (BS EN ISO 1461) Laser cut and folded.
    Fixing:
Supports should be adjusted to support Vandgard centrally over walls or to the back of fences with a clearance not exceeding 50mm. Bolted, clamped or welded to fences gates walls and soffits. Vandgard must be supported at 2 metre intervals.
(Designed to support Vandgard part nos VS05 and VSC05)   For steel palisade fencing, supports must be fixed to the pales at 2metre intervals. Usually cranked to the rear and fixed between the horizontal rail and vertical pale with one extra long 8mm fixing rivet .Use the existing fixing holes .
    Finish:
Standard finish means natural, self-colour galvanised metal finish (i.e. not coated or painted)    …

Model
SUPP01
Cranked support bracket

Cranked support bracket

Laser cut galvanised steel support bracket.  A universal 45° cranked support bracket that can be used left or right hand, designed to fit most applications including Walls Fences Gates & Steel palisade fencing.  A 45° cranked support bracket. Fixed vertically on walls etc. or horizontally under a soffit or on a flat ledge.   Simple to fix with 8mm fixings   Galvanised against corrosion   Strong 6mm steel bar    In Stock     Description:
Galvanised steel  support bracket cranked at 45°   Specification:   Ex 40 x 6 Mild steel bar slotted twice to receive 8mm fixing bolts ( bolts not supplied) and drilled with 29mm diameter hole to support Vandgard Anti-Climb axle. Laser cut and Galvanised after manufacture to (BS EN ISO 1461).
    Fixing:
Supports should be adjusted to support Vandgard centrally over walls or to the back of fences with a clearance not exceeding 50mm. Bolted, clamped or welded to fences gates walls and soffits. Vandgard must be supported at 2 metre intervals.
(Designed to support Vandgard part nos VS05 and VSC05)   For steel palisade fencing, supports must be fixed to the pales at 2metre intervals. Usually cranked to the rear and fixed between the horizontal rail and vertical pale with one extra long 8mm fixing rivet .Use the existing fixing holes .
    Finish:
Standard finish means natural, self-colour galvanised metal finish (i.e. not coated or painted)    …

Model
SUPP07
Wall Fixing

Wall Fixing
The Internal Socket fitting requires no welding, bending, or threading - just an Allen key to tighten the set screws. Replaces standard support brackets where a run of Anti Climb Guard abuts a vertical wall,  or use 2 for fixing between 2 walls...see more

The Internal Socket fitting requires no welding, bending, or threading - just an Allen key to tighten the set screws. Typical applications are for use as:  one end support bracket for walls, gable ends and numerous other general support structures. Replaces standard support brackets where a run of Anti Climb Guard abuts a vertical wall,  or use 2 for fixing between 2 walls  …

Model
VIS001
Result Pages: