JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

'L-shaped' Support

'L-shaped' Support

Galvanised steel support bracket. Designed to fit most applications including Walls, Fences, Gates and Steel palisade fencing. A universal support bracket that can be used left or right handed. Fixed vertically on walls etc. or horizontally under a soffit or on a flat ledge.   Simple to fix with 8mm fixings   Galvanised against corrosion   Strong 8mm x 40mm steel bar   In Stock!   Next Day Delivery!         Description:
Colour Coated Galvanised steel cranked support bracket   Specification:   Ex 40 x 8 Mild steel galvanised bar 'L-shaped' and holed to receive 2 x 8mm fixing bolts (bolts not supplied) and drilled with 29mm diameter hole to support Vandgard Anti-Climb axle.   Fixing:
Supports should be adjusted to support Vandgard centrally over walls and fences with a clearance not exceeding 50mm. Bolted, clamped or welded to fences gates walls and soffits. Vandgard must be supported at 2 metre intervals.
(Designed to support Vandgard part nos VD05 & VSC05)   For steel palisade fencing, supports must be fixed to the pales at 2metre intervals. Usually cranked to the rear and fixed between the horizontal rail and vertical pale with one extra long 8mm fixing rivet .Use the existing fixing holes .
    Finish:
Galvanised after manufacture to BS EN ISO 1461.   Polyester powder coating if required  to BS 6496:1984 is available for this product Shipping:
Next Day shipping is charged at cost
(i.e. Currently £1.00p each + £12 per consignment)…

Model
SUPP06
'L-shaped' Support

'L-shaped' Support

Galvanised steel support bracket. Designed to fit most applications including Walls, Fences, Gates and Steel palisade fencing. A universal support bracket that can be used left or right handed. Fixed vertically on walls etc. or horizontally under a soffit or on a flat ledge.   Simple to fix with 8mm fixings   Galvanised against corrosion   Strong 8mm x 40mm steel bar   In Stock!   Next Day Delivery!         Description:
Colour Coated Galvanised steel cranked support bracket   Specification:   Ex 40 x 8 Mild steel galvanised bar 'L-shaped' and holed to receive 2 x 8mm fixing bolts (bolts not supplied) and drilled with 29mm diameter hole to support Vandgard Anti-Climb axle.   Fixing:
Supports should be adjusted to support Vandgard centrally over walls and fences with a clearance not exceeding 50mm. Bolted, clamped or welded to fences gates walls and soffits. Vandgard must be supported at 2 metre intervals.
(Designed to support Vandgard part nos VD05 & VSC05)   For steel palisade fencing, supports must be fixed to the pales at 2metre intervals. Usually cranked to the rear and fixed between the horizontal rail and vertical pale with one extra long 8mm fixing rivet .Use the existing fixing holes .
    Finish:
Galvanised after manufacture to BS EN ISO 1461.   Polyester powder coating if required  to BS 6496:1984 is available for this product Shipping:
Next Day shipping is charged at cost
(i.e. Currently £1.00p each + £12 per consignment)…

Model
SUPP06
6m Galvanized Top Rail

6m Galvanized Top Rail

6m Galvanized Top Rail 26.60 452.20 41.5mm Diameter Complete With Tube Connector…

Model
6m Galvanized Top Rail 26.60 452.20 41.5mm Diameter Complete Wit
Access Deterrents for Pipes

Access Deterrents for Pipes
Vandgard® Witches Hat , an Access Deterrent Measure for exposed Pipelines and Crossings. Available to suit varying pipe sizes from 80mm to 1500mm or more .This unique system safely deters children and adults from climbing across pipelines or using them as a walkway....see more

Vandgard® Witches Hat , an Access Deterrent Measure for exposed Pipelines and Crossings. Available to suit varying pipe sizes from 80mm to 1500mm or more .This unique system safely deters children and adults from climbing across pipelines or using them as a walkway. The Vandgard® Witches Hat system is designed to reduce pressure on the pipe in flood conditions and eliminate condensation which might otherwise cause corrosion.  …

Model
witc01
Bespoke Colour Moulding (1000 MoQ)

Bespoke Colour Moulding (1000 MoQ)

Colour moulding
Roller Barrier may be in any colour, thickness and texture to customer specification.             Fast turnaround!   Description:
A surcharge for special colours per order.
Extra over our prices for stock Green White or Black.
  Finish:
A variety of finishes to customer specification including trademarked colours.…

Model
PLAS06
Bespoke non-standard supports

Bespoke non-standard supports

We can manufacture all kinds of bespoke support brackets for unusual applications. Examples include specialist supports to fit under a railway bridges and patented systems for fixing to towers and lattice structures. We work with a variety of materials including stainless steel, aluminium and galvanised mild steel. Please contact us with your project and we will do our best to provide a solution. The Price is an indication of the likely minimum cost.   Fast turnaround!   Description:
Bespoke support bracket design and manufacture service
    Fixing:
Supports should be adjusted to support Vandgard centrally over walls or cranked at 45 degrees to the back of fences with a clearance not exceeding 50mm. Bolted, clamped or welded to fences gates walls and soffits. Vandgard must be supported at 2 metre intervals.
(Designed to support Vandgard part nos VS05 and VSC05)   Finish:
A variety of finishes to customer specification including trademarked colour coating and galvanising after manufacture to (BS EN ISO 1461)…

Model
SUPP02
Bracket for Rota Spike

Bracket for Rota Spike
Bracket for Rota Spike...see more

Bracket for Rota Spike set at 2metre intervals…

Corner Spacer

Corner Spacer

Aluminium Corner Spacer designed to add strength to >90 degree corners. Corners can be vulnerable points in a security barrier. This accessory fits over Vandgard’s spindle to accurately hold corners together and maintain enough clearance to rotate freely. Used in conjunction with a Support Bracket ( Part No Supp01 )   Simple to fix   Corrosion free aluminium   Locks corners   In Stock!   Next Day Delivery!         Specification:   Corner Spacer ex BS6082 Aluminium Tube 275mm long x 27mm internal diameter closed and flattened one end and drilled with 27mm hole   Fixing:
Corners are securely locked together with Corner spacers positioned 150-300mm back from the end of a run of Vandgard Anti Climb Guard together with an extra support bracket. Supports should be adjusted to support Vandgard centrally over walls and fences with a clearance not exceeding 50mm. Bolted, clamped or welded to fences gates walls and soffits. Vandgard must be supported at 2 metre intervals and at corners.   NOTE: Corners less than 60degrees may be easily formed using a 25mm plumber’s pipe bending machine on the spindle.…

Model
CORN01
Corner strengthener

Corner strengthener

Mitre Corner Strengthener for use with Rota-Spike Galvanized …

Cranked support bracket

Cranked support bracket

Laser cut galvanised steel support bracket.  A universal 45° cranked support bracket that can be used left or right hand, designed to fit most applications including Walls Fences Gates & Steel palisade fencing.  A 45° cranked support bracket. Fixed vertically on walls etc. or horizontally under a soffit or on a flat ledge.   Simple to fix with 8mm fixings   Galvanised against corrosion   Strong 6mm steel bar    In Stock     Description:
Galvanised steel  support bracket cranked at 45°   Specification:   Ex 40 x 6 Mild steel bar slotted twice to receive 8mm fixing bolts ( bolts not supplied) and drilled with 29mm diameter hole to support Vandgard Anti-Climb axle. Laser cut and Galvanised after manufacture to (BS EN ISO 1461).
    Fixing:
Supports should be adjusted to support Vandgard centrally over walls or to the back of fences with a clearance not exceeding 50mm. Bolted, clamped or welded to fences gates walls and soffits. Vandgard must be supported at 2 metre intervals.
(Designed to support Vandgard part nos VS05 and VSC05)   For steel palisade fencing, supports must be fixed to the pales at 2metre intervals. Usually cranked to the rear and fixed between the horizontal rail and vertical pale with one extra long 8mm fixing rivet .Use the existing fixing holes .
    Finish:
Standard finish means natural, self-colour galvanised metal finish (i.e. not coated or painted)   Shipping:
Next Day shipping by TNT is charged at cost
(i.e. Currently £1.00p each + £12 per consignment)…

Model
SUPP07
Double Row cranked support bracket

Double Row cranked support bracket

Galvanised steel support bracket designed to fit most double row applications including Walls Fences Gates & Steel palisade fencing. A vertical support bracket . Fixed vertically on walls etc. or horizontally under a soffit or on a flat ledge.   Simple to fix with 8mm fixings   Galvanised against corrosion   Strong 8mm steel bar    In Stock     Description:
Galvanised steel straight support bracket   Specification:   Ex 40 x 8 Mild steel bar slotted twice to receive 8mm fixing bolts ( bolts not supplied) and drilled with 29mm diameter hole to support Vandgard Anti-Climb axle. Galvanised after manufacture to (BS EN ISO 1461).
    Fixing:
Supports should be adjusted to support Vandgard centrally over walls or to the back of fences with a clearance not exceeding 50mm. Bolted, clamped or welded to fences gates walls and soffits. Vandgard must be supported at 2 metre intervals.
(Designed to support Vandgard part nos VS05 and VSC05)   For steel palisade fencing, supports must be fixed to the pales at 2metre intervals. Usually cranked to the rear and fixed between the horizontal rail and vertical pale with one extra long 8mm fixing rivet .Use the existing fixing holes .
    Finish:
Standard finish means natural, self-colour metal finish (i.e. not coated or painted)   Shipping:
Next Day shipping by TNT is charged at cost
(i.e. Currently £1.00p each + £12 per consignment)…

Model
SUPP09
Dual Zone Analyser GD5000

Dual Zone Analyser GD5000

The GD5000 analyser, combined with Alpha Sensor, is a stand alone perimeter intruder detection device. It exploits the precision Alpha Sensor technology by processing the analogue signal generated by an intrusion attempt on the perimeter fence For use with the Defensor system, it is designed to pick up vibrations as soon as any contact is made with the fence. A security system which incorporates Defensor will alarm as soon as an attack starts. During the time taken to breach the fence, the area of attack can be located, security staff mobilised and CCTV, lights and sirens activated. This means that the control of the situation stays with the security service and the attack can often be prevented.…

Model
ACOU02
End Bracket

End Bracket

End Bracket for Rota 10.10 20.20 Spike Above RSJ Post (J4/04117/2) Galvanized (Palisade End)…

Model
End Bracket
End Bracket for Rota Spike.

End Bracket for Rota Spike.

End Bracket for Rota Spike. Galvanized…

Extra Joining Spigot

Extra Joining Spigot

Aluminium joining spigot. This accessory is designed to easily join together two lengths of Vandgard shaft in one continuous run. The spigot is made slightly larger than the internal diameter of the shaft. Using a pair of ‘Mole’ or ‘Vice’ grips the spigot is squeezed and inserted halfway into the shaft so that it springs open tightly in place inside the shaft.   Simple to fix   Corrosion free aluminium   In Stock!   Next Day Delivery!         Specification:   Aluminium spigot extruded section to patented design 150mm long. Ex BS 6082 aluminium. Designed for use with Vandgard anti-climb system and shaft (product code vs05 contains one spigot per 2metres))   Fixing:
Using grips the sprung spigot is compressed sufficiently to fit inside the tubular aluminium shaft and then hammered in for approximately 75mm ensuring a tight fit. The process is repeated with further sections of shaft at maximum 2 metre intervals to provide a smooth and continuous spindle.   Note: When fixing a ‘Rotaguard’ acoustic alarm system, the sensor should be fed through the spindle during the fixing process.…

Model
SPIGBAC01
Extra Top Rail Shaft 2m

Extra Top Rail Shaft 2m


2m Top Rail Shaft 41.5mm Diameter  Supplied in 2m lengths . 41.5mm dia x 2mm wall thickness. For use with Rota spike Security topping system 
Specifications
Width:41.5mm
Length:2000mm…

Five Pair Feeder Cable

Five Pair Feeder Cable

For further infrmation, please download the Technical Information PDFs Five Pair Feeder Cable…

Model
ACOU08
G19 End Boss

G19 End Boss
G19 End Boss includes fitted Oilite Bearing Oilite Bearing Code No. AI162024 I/D to suit 1" Dia. S.S. Tube 1 Pipe Clamp Spinner Assembly 1 1" O/D x 0.081 w/t. St. Steel Tube...see more

  G19 End Boss includes fitted Oilite Bearing Oilite Bearing Code No. AI162024  I/D to suit 1" Dia. S.S. Tube  1 Pipe Clamp Spinner Assembly 1 1" O/D x 0.081 w/t. St. Steel Tube   …

Model
G19EB
G19 End Support 122x215

G19 End Support 122x215

Intermediate Spinner assembly to suit Pipe Strap As G19 Specification…

Model
End122x215
G19 End Support 133x215

G19 End Support 133x215

Intermediate Spinner assembly to suit Pipe Strap As G19 Specification…

Model
End133x215
Result Pages: