Galvanised steel support bracket designed to fit most double row applications including Walls Fences Gates & Steel palisade fencing. A vertical support bracket . Fixed vertically on walls etc. or horizontally under a soffit or on a flat ledge.
Simple to fix with 8mm fixings
Galvanised against corrosion
Strong 8mm steel bar
Galvanised steel straight support bracket
Ex 40 x 8 Mild steel bar slotted twice to receive 8mm fixing bolts ( bolts not supplied) and drilled with 29mm diameter hole to support Vandgard Anti-Climb axle. Galvanised after manufacture to (BS EN ISO 1461).
Supports should be adjusted to support Vandgard centrally over walls or to the back of fences with a clearance not exceeding 50mm. Bolted, clamped or welded to fences gates walls and soffits. Vandgard must be supported at 2 metre intervals.
(Designed to support Vandgard part nos VS05 and VSC05)
For steel palisade fencing, supports must be fixed to the pales at 2metre intervals. Usually cranked to the rear and fixed between the horizontal rail and vertical pale with one extra long 8mm fixing rivet .Use the existing fixing holes .
Standard finish means natural, self-colour metal finish (i.e. not coated or painted)
Next Day shipping by TNT is charged at cost
(i.e. Currently £1.00p each + £12 per consignment)…
The GD5000 analyser, combined with Alpha Sensor, is a stand alone perimeter intruder detection device. It exploits the precision Alpha Sensor technology by processing the analogue signal generated by an intrusion attempt on the perimeter fence For use with the Defensor system, it is designed to pick up vibrations as soon as any contact is made with the fence. A security system which incorporates Defensor will alarm as soon as an attack starts. During the time taken to breach the fence, the area of attack can be located, security staff mobilised and CCTV, lights and sirens activated. This means that the control of the situation stays with the security service and the attack can often be prevented.…